Major Sewer System Types and How They Work

There are three types of modern sewer systems: Sanitary sewers (also called foul sewers), storm sewers (also called surface water sewers), and combined sewers. In this brief article from best real money pokies Australia, we’ll go over the basics of each.

Combined sewers

Combined sewers are well….combined! That is, they use a single pipe to carry both wastewater and storm runoff water to wastewater plants. They haven’t used much anymore because when it rains a lot the system can’t handle both the surface water and the wastewater and this causes the sewer to overflow. Because of this, new systems separate storm sewers from sanitary sewers.

How they work

Combined sewer overflow events can also cause too much wastewater to reach sewage treatment plants. When this happens the plant is not able to treat the wastewater properly. Even worse, during extremely severe weather events combined sewers can even cause wastewater – including raw sewage – to back-up into inhabited buildings. The cost to clean up this stinky mess is no insignificant amount.

Sanitary sewers

Sanitary sewers carry wastewater from homes and businesses to wastewater treatment plants. They consist of pipes, manholes, and pumping stations and their role is to maintain water quality because it’s necessary for good public health.

Here’s how they work…

When you flush the toilet or wash dishes in the kitchen sink that water is carried away from your home (or business) through relatively small pipes to the sewer main in the street or to your septic system. The pipes that take waste from your home (or business) to the sewer main are only large enough to remove toilet paper and human waste. From there it continues on until it reaches a wastewater treatment plant where the wastewater is treated so as to remove pollutants before it returns to the environment. When non-biodegradable items are flushed, such as sanitary wipes, this interferes the public wastewater system (potentially causing blockages and overflows) and with processes at the plant.

Usually, sanitary sewers use gravity to carry the wastewater away. However, in low-lying areas pumps are sometimes used when the wastewater needs to reach an area that’s at a higher elevation. Sanitary sewers are accessed via manholes for routine maintenance and repair. Clean-outs located on your property provide access to the part of the sanitary sewer that goes from your home to the sewer main in the street. If there’s a blockage in this pipe it can be accessed via the clean-out.

Storm sewers

Storm sewers (also called surface sewers) carry rainwater and melting snow (storm sewers are not designed to carry wastewater) from roofs and roads and channel it into streams, rivers, and other bodies of water.

Here’s how they work after being curated by experts at jeux de casino en ligne

When it rains (or when snow melts) water enters storm sewers via manholes, pipes, storm drain inlets, open ditches, etc. This water is then carried away until it eventually flows directly into streams, rivers, and waterways without having been treated. This is why you should never put any kind of hazardous waste down a storm drain. This includes things like paint, solvents, used motor oil, and cleaning liquids. They can damage rivers, lakes, wetlands, and even poison wildlife.

About Author

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.